AXAGON ADSA-1S6 USB3.0 - SATA 6G UASP HDD External Adapter Incl. Case *USBAM *MICROBM *SATAF

AXAGON ADSA-1S6 USB3.0 - SATA 6G UASP HDD External Adapter Incl. Case *USBAM *MICROBM *SATAF
Product Code:
ADSA-1S6
Merk:
Axagon
Artikelnummer:
00023116
EAN Code:
8595247903075

Login om uw prijsinformatie te zien!

A compact USB 3.0 adapter with case is designed for all 2.5SATA SSDs and hard disks up to 9.5 mm height.
It deals with all SATA, SATA II and SATA III 2.5drives without limiting maximum capacity.
The USB 3.0 interface guarantees seamless, high-speed connectivity to all existing computers.
USB 3.0 ? ANY 7 & 9.5 mm 2.5HDD/SSD ? ANY CAPACITY
The actual SATA III/6G interface with UASP support allows you to enjoy the speed of modern SSD disks.
The UASP support significantly increases transmission rates especially when working with small files in the queue.
Supports TRIM feature to limit the gradual degradation of SSD performance over time.
USB 3.0 ? SATA 6G ? UASP
Disk installation only takes a few seconds.
Simply plug the disk directly into the SATA connector of the adapter.
The set can be connected to the PC immediately or inserted into a protective case before that.
No screws, just a few simple steps.
THE FASTEST & EASIEST ASSEMBLY ? SCREWLESS
The case holds a standard 2.5disk even with a USB adapter connected.
It also serves to transport or store the adapter itself without the disk, with a cable inside the case.
Minimum dimensions and weight make the product ideally suited also for occasional mobile use.
PRACTICAL CASE ? MINI & LIGHTWEIGHT ? MOBILE
Pure minimalist design of slim and lightweight body.
Pleasantly matte surface finish.
The delicate blue LED indicates power and data transmission.
PURE DESIGN ? SLIM CASE ? MATTE FINISH ? DELICATE BLUE LED
Reading of S.M.A.R.T. information monitoring the condition of the external disk.
Supports turning off the disk after removing the device or spinning down the PC.
You can boot your computer from an SSD or hard drive in the external box.
HDD S.M.A.R.T. INFO ? HDD TURN OFF ? BOOT SUPPORT
AXAGON SLIMport 6 is a small but very fast and handy helper usable in many ways such as data storage and sharing, backup, disk testing, and more.
It is an ideal tool for data migration when replacing the hard drive with a solid state drive disk in your laptop.
The installation can be handled even by a layman - the disk connects to the adapter and the adapter to the computers USB port; the rest is done automatically.
HANDY TOOL ? DATA MIGRATION ? AUTO INSTALL
A compact AXAGON ADSA-1S6 SLIMport6 high-speed adapter with USB 3.0 and SATA 6G interface intended for easy connection of SSD or 2.5SATA disk.
A handy tool to quickly connect a SSD or laptop disk, including boot support.
The UASP support significantly increases transmission rates especially when working with small files in the queue.
The TRIM feature support limits the gradual degradation of SSD performance over time.
Reading of S.M.A.R.T. information monitoring the condition of the connected disks. Supports spinning down of connected disks as well as an adapter.
The installation can be handled even by a layman - the disk connects to the adapter and the adapter to the computers USB port; the rest is done automatically.
Minimum dimensions and weight, along with an enclosed disc case, make the product ideally suited even for mobile use.
Features:
? Compatible with USB 3.0 and backward compatible with USB 2.0.
? Supports transmission rates 12 / 480 / 5000 Mb/s (low / full / high speed).
? Supports 2.5SATA III / II / I disks of all capacities.
? Compliant with Serial ATA 3.1 specification (SATA/600), transmission rates of up to 6 Gb/s.
? Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s).
? Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s).
? The total bandwidth / transmission rate of the adapter is determined by the USB 3.0 interface used (theor. 5 Gbit/s).
? Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport).
? Supports booting from SSD/HDD connected via an USB adapter.
? HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 22 minutes.
? HDD Turn Off - turns off the disk after removing the device or spinning down the PC.
? Possibility to connect your device while running thanks to the Hot Plug support.
? Full Plug and Play support.
? Connection via USB 3.0 micro B female connector.
? USB 3.0 cable USB 3.0 Type A male / USB 3.0 Type B male 10 cm long is included.
? Supplying the power via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases.
? A blue LED indicating the connection to the computers USB port (permanent light) and data transmission (blinking).
? Compact adapter dimensions 70 x 21 x 10 mm.
? Adapter weight only 11 g, weight of USB cable 18 g.
? Simple plastic case holds 2.5disk max. 9.5 mm high with USB adapter connected (USB cable is led out through hole in the case).
? For thin 7mm SSDs/HDDs foam pads are included for better fit in the case.
? The case can also serve to transport or store the adapter itself without the disk, with the USB cable inside the case.
? Case dimensions 122 x 78 x 19 mm.
? Case weight 40 g.
Supported OSs:
? MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.
? Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.
Package contains:
? USB 3.0 - SATA 6G adapter,
? USB 3.0 cable 10 cm,
? plastic case for 2.5disk and USB adapter,
? foam pads for 7 mm HDDs and SSDs,
? printed multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,
? Packed in a cardboard box.
Er zijn geen uitgebreide specificaties beschikbaar voor dit product.