AXAGON ADSA-FP3 USB3.0 - SATA 6G HDD FASTPort3 Adapter Incl. AC *USBAM *SATAF

AXAGON ADSA-FP3 USB3.0 - SATA 6G HDD FASTPort3 Adapter Incl. AC *USBAM *SATAF
Product Code:
ADSA-FP3
Merk:
Axagon
Artikelnummer:
00023181
EAN Code:
8595247903440

Login om uw prijsinformatie te zien!

The handy helper FASTport 3 easily and quickly connects any SATA disk or drive to your computer.
Supports all types of 2.5HDD / SSD, 3.5hard disks and 5.25optical CD, DVD or Blu-ray drives.
It deals with all SATA, SATA II and SATA III disks without limiting maximum capacity.
ANY SIZE ? ANY CAPACITY
The USB 3.0 interface guarantees seamless, high-speed connectivity to all existing computers.
The current SATA III / 6G interface allows to use the speed of modern SSD disks.
USB 3.0 ? SATA 6G
Reading of S.M.A.R.T. information monitoring the condition of the connected disks.
Supports spindown of connected disks as well as an adapter.
The possibility to boot your PC from HDD / SSD connected via FASTport 3 adapter.
HDD S.M.A.R.T. INFO ? HDD AUTO STOP ? BOOT SUPPORT
Automatic installation can be handled even by a layman. Drivers are included with operating systems and are installed completely automatically.
The permanently attached USB cable for direct connection to the computer is always at hand and will not be lost.
The adapter with 2.5HDD/SSD is just enough to power on the USB bus, no need to handle the network-based feeder.
AUTO INSTALL ? FIXED USB CABLE ? USB POWER
Pure minimalist design of slim and lightweight body.
The delicate blue LED indicates power and data transmission.
PURE DESIGN ? SLIM CASE ? DELICATE BLUE LED
The universal all-in-one AXAGON ADSA-FP3 FASTport3 adapter with USB 3.0 and SATA 6G interface for easy connection of any SATA disk or drive.
Supports all types of 2.5HDD / SSD, 3.5hard disks and 5.25optical CD, DVD or Blu-ray drives.
It deals with all SATA, SATA II and SATA III disks without limiting maximum capacity.
The current SATA III / 6G interface allows to use the speed of modern SSD disks.
Reading of S.M.A.R.T. information monitoring the condition of the connected disks. Supports spinning down of connected disks as well as an adapter.
The installation can be handled even by a layman - the disk connects to the adapter and the adapter to the computers USB port; the rest is done automatically.
The adapter with 2.5HDD/SSD is just enough to power on the USB bus, no need to handle the network-based feeder.
Features:
? Compatible with USB 3.0 and backward compatible with USB 2.0.
? Supports transmission rates 12 / 480 / 5000 Mb/s (low / full / high speed).
? Supports 2.5and 3.5SATA III/II/I disks without limiting maximum capacity.
? Compliant with Serial ATA 3.1 specification (SATA/600), transmission rates of up to 6 Gb/s.
? Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s).
? Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s).
? The total bandwidth / transmission rate of the adapter is determined by the USB 3.0 interface used (theor. 5 Gbit/s).
? Supports booting from SSD/HDD connected via an USB adapter.
? HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 15 minutes.
? HDD Turn Off - turns off the disk after removing the device or spinning down the PC.
? Possibility to connect your device while running thanks to the Hot Plug support.
? Full Plug and Play support.
? Connection via direct USB 3.0 Type A male connector on a 22 cm long cable that is permanently connected to the adapter.
? A blue, decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking).
? Supplying the power via USB 3.0 bus up to 900mA from one USB port is sufficient for 2.5HDD / SSD.
? To supply power to an adapter with 3.5disk or optical drive, a compact external AC/DC adapter 12V - 2A (24W) with supply cable approx. 150 cm long is included.
? USB adapter dimensions 71 x 44.5 x 14.3 mm.
? Adapter weight only 38 g, incl. USB cable.
Supported OSs:
? MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.
? Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.
Package contains:
? USB 3.0 - SATA adapter with permanently connected 22 cm long cable,
? power adapter 100-240V / 12V-2.2A,
? printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,
? packed in a cardboard box.
Er zijn geen uitgebreide specificaties beschikbaar voor dit product.